VeryGreen™ VG7262

Supplier: Polyalloy
GENERAL INFORMATION
Product type:
Thermoplastic >> PLA (Polylactide) >> Polylactide (Polylactic Acid) [PLA]
  • Labels & Ratings
  • BioPreferred label (USDA)

Product performance

VeryGreen™ VG7262 is a general purpose, biodegradable and high stereochemical purity polylactide (polylactic acid) (PLA) grade by Polyalloy. Obtained from non-GMO cassava or sugarcane. Exhibits high... 

  • Material Status
  • Commercial
PROPERTIES
Hardness Properties
Value
Test Conditions
Test Method
Durometer Hardness
ASTM D2240
Impact Properties
Value
Test Conditions
Test Method
Notched Izod Impact
ASTM D256
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus
ASTM D790
Flexural Strength
ASTM D790
Tensile Elongation
ASTM D638
Tensile Modulus
ASTM D638
Tensile Strength (Tensile Stress)
ASTM D638
Physical Properties
Value
Test Conditions
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
ASTM D1238
Molding Shrinkage
ASTM D995
Specific Gravity (Density)
ASTM D792
Thermal Properties
Value
Test Conditions
Test Method
Heat Deflection Temperature Under Load (HDT)
ASTM D648
Melting Temperature (Melting Point)
GB/T19466.3-2004
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Cylinder Center Temperature
180 - 190 °C
Injection - Cylinder Front Temperature
170 - 180 °C
Injection - Cylinder Rear Temperature
165 - 175 °C
Injection - Drying Temperature
80 °C
Injection - Drying Time
2 - 4 hr
Injection - Max. Moisture Content
0.1 %
Injection - Mold Temperature
80 - 100 °C
Injection - Nozzle Temperature
170 - 180 °C
Back to Top