Ultramid® S3WG7 Balance

Supplier: BASF
GENERAL INFORMATION
Product type:
Thermoplastic >> PA (Polyamide, Nylon) >> Polyamide 6-10 (Nylon 6-10) [PA 6-10 (Nylon 6-10)]
  • Labels & Ratings
  • OK Compost
  • DIN EN 13432 (for compostable and biodegradable polymers),
  • EU Directive 2002/72/EC (as amended)-(Food contact),
  • US food contact notification FCN 178, 475 and 907,
  • ASTM D 6866 (for biobased)
  • FDA Approval
  • Yes

Product performance

Polyamide PA 610. It is produced by polycondensation of hexamethylene diamine and sebacic acid. This is based to the extent of about 60 per cent on sebacic acid, a renewable raw material derived from... 

  • Material Status
  • Commercial
PROPERTIES
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Unnotched Impact Strength
ISO 179/1eU
Charpy Unnotched Impact Strength
ISO 179/1eU
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
ISO 178
Flexural Modulus (Stiffness)
ISO 178
Flexural Strength
ISO 178
Flexural Strength
ISO 178
Tensile Elongation
ISO 527-1/- 2
Tensile Elongation
ISO 527-1/- 2
Tensile Modulus
ISO 527-1/-2
Tensile Modulus
ISO 527-1/-2
Tensile Strength (Tensile Stress)
ISO 527-1 /-2
Tensile Strength (Tensile Stress)
ISO 527-1 /-2
Physical Properties
Value
Test Conditions
Test Method
Moisture Absorption
Similar to ISO 62
Specific Gravity (Density)
ISO 1183
Viscosity Number (Reduced Viscosity)
DIN 53726
Water Absorption
Similar to ISO 62
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Polymerization >> Polycondensation
Injection molding - thermoplastics
Injection molding - thermoplastics >> Overmolding >> Plastic on Metal
Injection - Melt Temperature
270 - 290 °C
Injection - Mold shrinkage
0.4 %
0.4 %
1 %
Injection - Mold Temperature
80 - 90 °C
- Melt volume rate MVR 275/5
25 °C
- Melting Point
220 °C
- Pressure
5 kg
- Temperature
275 °C
Back to Top