Pearlthane® ECO D12T80

Supplier: Lubrizol
GENERAL INFORMATION
Product type:
Thermoplastic >> TPU (Thermoplastic Polyurethane) >> Bio-based Thermoplastic Polyurethane [TPU, Bio-based]

Product performance

Pearlthane® ECO D12T80 by Lubrizol is a high performance bio-based thermoplastic polyurethane (TPU) resin with 42% bio-based content. This low-density renewable grade exhibits properties similar to... 

  • Material Status
  • Commercial
PROPERTIES
Hardness Properties
Value
Test Conditions
Test Method
Mechanical Properties
Value
Test Conditions
Test Method
Tear Strength Unnicked
ISO 34-1B
Tensile Strength
ISO 527-2/5A/500
Tensile Stress
ISO 527-2/5A/500
Tensile Stress
ISO 527-2/5A/500
Tensile Stress
ISO 527-2/5A/500
Ultimate Elongation
ISO 527-2/5A/500
Physical Properties
Value
Test Conditions
Test Method
Abrasion Resistance
ISO 4649-A
Specific Gravity
ISO 2781
Thermal Properties
Value
Test Conditions
Test Method
Vicat Softening point
ISO 306 (A50)
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
100 °C
Injection - Drying Time
3 hr
Injection - Feed Zone Temperature
40 °C
Injection - Nozzle Temperature
210 °C
Injection - Target Dew Point
-40 °C
Injection - Zone 1 Temperature
190 °C
Injection - Zone 2 Temperature
200 °C
Injection - Zone 3 Temperature
200 °C
Injection - Zone 4 Temperature
200 °C
Use of dehumidifying type dryer is recommended.
Back to Top