Natureplast ACI 001

Supplier: Natureplast
GENERAL INFORMATION
Product type:
Thermoplastic >> Cellulosic Polymers

Product performance

Cellulose ester. Is a transparent, thermoplastic resin made from renewable vegetal resources and is poorly biodegradable. Used on conventional injection molding equipments. It is insoluble in water.... 

  • Appearance
  • Transparent / White
  • Physical Form
  • Granules / Solid
  • Material Status
  • Commercial
PROPERTIES
Hardness Properties
Value
Test Conditions
Test Method
Rockwell Hardness
ASTM D785
Impact Properties
Value
Test Conditions
Test Method
Notched Izod Impact
ASTM D256
Notched Izod Impact
ASTM D256
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
ASTM D790
Flexural Strength
ASTM D790
Tensile Elongation
ASTM D638
Tensile Strength (Tensile Stress)
ASTM D638
Tensile Strength (Tensile Stress)
ASTM D638
Other Properties
Value
Test Conditions
Test Method
Physical Properties
Value
Test Conditions
Test Method
Plasticizer Content
Specific Gravity (Density)
ASTM D792
Specific Gravity (Density)
Thermal Properties
Value
Test Conditions
Test Method
Fusion Temperture
Heat Deflection Temperature Under Load (HDT)
ASTM D648
Heat Deflection Temperature Under Load (HDT)
ASTM D648
Melting Temperature (Melting Point)
Vicat Softening Temperature
ASTM D1525
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Feed Temperature
200 °C
Injection - Mold Temperature
50 - 70 °C
Injection - Nozzle Temperature
215 °C
Injection - Zone 1 Temp.
215 °C
Injection - Zone 2 Temp.
215 °C
Injection - Zone 3 Temp.
215 °C
Back to Top