MCGB Duramaze™ CC HDPE 7030

Supplier: MCG BioComposites
GENERAL INFORMATION

Product performance

Proprietary blend of corn cob fiber and high density polyethylene for injection molding applications. Its typical size is 0.0156 inch. The product should be stored in a cool, dry, and sanitary area to... 

  • Appearance
  • Light brown
  • Material Status
  • Commercial
PROPERTIES
Physical Properties
Value
Test Conditions
Test Method
Specific Gravity (Density)
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
220 °F
Injection - Front Temperature
360 - 375 °F
Injection - Middle Temperature
350 - 360 °F
Injection - Mold Temperature
60 - 170 °F
Injection - Nozzle Temperature
360 - 375 °F
Injection - Processing (Melt) Temp
< 400 °F
Injection - Rear Temperature
350 - 360 °F
Injection - Suggested Max Moisture
> 0.5 %
Resin needs to be dried before processing if the moisture is above 0.5%. Resin will dry quickly at 220°F in a desiccant dryer. The melt temperature of the resin should remain below 400°F to prevent the material from discoloring and having a burnt odor.
Back to Top