MAJ'ECO GN080BS

Supplier: ADmajoris
GENERAL INFORMATION
Product type:
Thermoplastic >> Unspecified Thermoplastic [Unspecified Thermoplastic] >> Unspecified Thermoplastic [Unspecified Thermoplastic]
  • Labels & Ratings
  • EU No 10/2011
  • FDA 21 CFR 176.170(c), Table 1 & 2
  • FDA Approval
  • Yes

Product performance

MAJ'ECO GN080BS by ADmajoris is a recyclable, biodegradable thermoplastic grade reinforced with 20% carbon fiber. Possesses 20% biobased carbon content and 32% renewable resource content. Is suitable... 

  • Physical Form
  • Pellets
  • Material Status
  • Commercial
PROPERTIES
Flammability Properties
Value
Test Conditions
Test Method
Flame Rating
UL 94
Impact Properties
Value
Test Conditions
Test Method
Gardner Impact
ASTM D 5420
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus
ASTM D790
Flexural Stress
ASTM D790
Tensile Strength (Tensile Stress)
ASTM D638
Tensile Elongation
ASTM D638
Tensile Modulus
ASTM D638
Physical Properties
Value
Test Conditions
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
ASTM D1238
Molding Shrinkage
Internal Method
Specific Gravity (Density)
ASTM D792A
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
70 °C
Injection - Drying Time
4 hr
Injection - Holding Pressure
50 - 70 % of injection pressure
Injection - Injection Rate
Moderate -
Injection - Mold Temperature
20 - 50 °C
Injection - Processing (Melt) Temp
170 - 200 °C
Back to Top