INZEA® F29 HT G30

Supplier: Nurel
GENERAL INFORMATION
Product type:
Thermoplastic >> PLA (Polylactide) >> Polylactide (Polylactic Acid) [PLA]
  • Labels & Ratings
  • BioPreferred label (USDA)
  • EN13432
  • FDA Regulation 10/2011
  • FDA Approval
  • Yes

Product performance

INZEA® F29 HT G30 by Nurel is a biobased, biodegradable polylactic acid (PLA) grade. Is suitable for processing by injection molding. Recommended for mulching film, garden waste bags, clips, guides,... 

  • Material Status
  • Commercial
PROPERTIES
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus
ISO 178
Flexural Modulus
ISO 178
Flexural Strength
ISO 178
Flexural Strength
ISO 178
Tensile Elongation
ISO 527-1/-2
Tensile Elongation
ISO 527-1/-2
Tensile Modulus
ISO 527-1/-2
Tensile Modulus
ISO 527-1/-2
Tensile Strength (Tensile Stress)
ISO 527-1/-2
Tensile Strength (Tensile Stress)
ISO 527-1/-2
Physical Properties
Value
Test Conditions
Test Method
Biobased Content
ASTM D6866
Moisture Content
NAPPA-032
Thermal Properties
Value
Test Conditions
Test Method
Heat Deflection Temperature Under Load (HDT)
ISO 75-1/-2
Heat Deflection Temperature Under Load (HDT)
ISO 75-1/-2
Melting Temperature (DSC)
ISO 3146
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
60 °C
Injection - Melt Temperature
155 - 170 °C
Injection - Mold Temperature
20 - 30 °C
- Injection speed should be medium to high.
- Back pressure should be moderate.

Products with same tradename

INZEA® F08

INZEA® F09

INZEA® F10

INZEA® F10F

Back to Top