Grilamid® 2S 25 W 20 X Black 9992

Supplier: EMSGrivory EMS Group
GENERAL INFORMATION
Product type:
Thermoplastic >> PA (Polyamide, Nylon) >> Polyamide 6-10 (Nylon 6-10) [PA 6-10 (Nylon 6-10)]
  • Labels & Ratings
  • REACH Compliant
  • RoHS (2011/65/EU) Compliant
  • WEEE (2002/96/EC) Compliant

Product performance

Grilamid 2S 25 W 20 X Black 9992 is an impact modified and heat stabilized polyamide 6-10 (PA 6-10) grade. Is produced by poly-condensation of hexamethylene diamine (obtained from crude oil) and... 

  • Market applications
  • Automotive >> Under the hood - Filters (air, oil...)
  • Automotive >> Under the hood - Flexible tubes
  • Appearance
  • Black
  • Physical Form
  • Granules
  • Material Status
  • Commercial
PROPERTIES
Electrical Properties
Value
Test Conditions
Test Method
Comparative Tracking Index
IEC 60112
Dielectric Strength (Electric Strength)
IEC 60243-1
Surface Resistivity
IEC 60093
Volume Resistivity
IEC 60093
Flammability Properties
Value
Test Conditions
Test Method
Flammability (UL94)
IEC 60695-11-10
Hardness Properties
Value
Test Conditions
Test Method
Ball Indentation Hardness
ISO 2039-1
Impact Properties
Value
Test Conditions
Test Method
Charpy Impact Strength
ISO 179/1eU
Charpy Impact Strength
ISO 179/1eU
Charpy Notched Impact Strength
ISO 179/1eA 2
Charpy Notched Impact Strength
ISO 179/1eA 2
Mechanical Properties
Value
Test Conditions
Test Method
Tensile Elongation
ISO 527-2
Tensile E-Modulus
ISO 527-2
Tensile Strength
ISO 527-2
Physical Properties
Value
Test Conditions
Test Method
Humidity Absorption
ISO 62
Molding Shrinkage
ISO 294-4, 2577
Molding Shrinkage
ISO 294-4, 2577
Water Absorption
ISO 62
Thermal Properties
Value
Test Conditions
Test Method
CLTE (Coefficient of Linear Thermal Expansion)
ISO 11359-2
CLTE (Coefficient of Linear Thermal Expansion)
ISO 11359-2
Heat Deflection Temperature Under Load (HDT)
ISO 75-2/A
Heat Deflection Temperature Under Load (HDT)
ISO 75-2/B
Max. Continuous Use Temperature
ISO 2578
Max. Continuous Use Temperature
ISO 2578
Melting Temperature (Melting Point)
ISO 11357-3
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Extrusion >> Profiles
Extrusion - Compression Zone Temperature
230 - 260 °C
Extrusion - Dew Point of the Dryer
-30 °C
Extrusion - Drying Temperature
< 80 °C
Extrusion - Drying Time
4 - 12 hr
Extrusion - Feed Temperature
230 - 260 °C
Extrusion - Heat Set Oven
230 - 260 °C
Extrusion - Hopper Temperature
60 - 90 °C
Extrusion - Melt Temperature
230 - 260 °C
Extrusion - Metering Zone Temperature
230 - 260 °C
Extrusion - Nozzle Temperature
230 - 260 °C
Extrusion - Screw Compression ratio
2.0:1 - 3.0:1
Extrusion - Screw Length
24 - 25 D
Extrusion - Suggested Max Moisture
0.1 %
Extrusion - Vacuum Oven Temperature
< 100 °C
Extrusion - Vacuum Oven Time
4 - 12 hr
Wear protected, universal screws (3 zones) are recommended.
Grooved Feeding Zone: In order to obtain a higher through-put, grooved bush depth should not exceed 0.5 mm.
Back to Top