GDH-B1

Supplier: Green Dot
GENERAL INFORMATION
Product type:
Thermoplastic >> Unspecified TPE [Unspecified TPE] >> Unspecified TPE, Bio-based [Unspecified TPE, Bio-based]
  • Labels & Ratings
  • DIN EN 13432 (Compostable),
  • ISO 14855 (Compostable),
  • ASTM-D6400 (Biodegradable)

Product performance

GDH-B1 by Green Dot is a bio-based melt blended resin. Suitable for injection molding. GDH-B1 is compostable in accordance with DIN EN 13432 and ISO 14855 standards.

  • Material Status
  • Commercial
PROPERTIES
Elastomers Properties
Value
Test Conditions
Test Method
Compression Set
ASTM D395
Compression Set
ASTM D395
Tear Strength
ISO 34-1
Hardness Properties
Value
Test Conditions
Test Method
Durometer Hardness (Shore)
ISO 868
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
ISO 37
Tensile Elongation
ISO 37
Tensile Strength (Tensile Stress)
ISO 37
Physical Properties
Value
Test Conditions
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
ISO 1133
Specific Gravity
ISO 1183 -1
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Extrusion
Injection molding
Injection - Center Temperature
300 - 329 °F
Injection - Drying Temperature
90 - 100 °F
100 - 120 °F
Injection - Drying Time
2 - 3 hr
4 - 5 hr
Injection - Front Temperature
300 - 329 °F
Injection - Nozzle Temperature
300 - 329 °F
Injection - Rear Temperature
300 - 329 °F
Resin must be dried before processing. Processing at temperatures above 350°F and in combination of high shear condition such as high injection speed may result in thermal degradation of this resin.
Back to Top