Emerald™ PPG20.1210FC30

Supplier: Eastern Bioplastics
GENERAL INFORMATION
Product type:
Thermoplastic >> PP (Polypropylene)

Product performance

Emerald™ PPG20.1210FC30 by Eastern Bioplastics is an eco-friendly fiber reinforced resin PP composite. This composite contains 30% less petroleum than standard, pure polyolefins. Emerald™... 

  • Physical Form
  • Pellets
  • Material Status
  • Commercial
PROPERTIES
Hardness Properties
Value
Test Conditions
Test Method
Durometer Hardness (Shore)
ASTM D2249
Impact Properties
Value
Test Conditions
Test Method
Notched Izod Impact
ASTM D256
Unnotched Izod Impact
ASTM D256
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
ASTM D790
Tensile Modulus
ASTM D638
Tensile Strain
ASTM D638
Tensile Strength (Tensile Stress)
ASTM D638
Physical Properties
Value
Test Conditions
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
ASTM D1238
Specific Gravity (Density)
In House Standard
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Extrusion
Injection - Drying Temperature
< 105 °C
Injection - Feed Temperature
185 - 195 °C
Injection - Front Temperature
185 - 195 °C
Injection - Middle Temperature
185 - 195 °C
Injection - Nozzle Temperature
185 - 195 °C
Injection - Suggested Max Moisture
< 1 %
To maximize the physical and mechanical properties injection mold this resin at the lowest possible temperature at which the material still flows smoothly. Because this material is a natural fiber filled composite, it is susceptible to shear degradation. Cycle and resonance times should be monitored closely to avoid degrading the material.
Back to Top