Ecopond Flex-262

Supplier: Kingfa
GENERAL INFORMATION
Product type:
Thermoplastic >> PLA (Polylactide) >> Polylactide (Polylactic Acid) [PLA]
  • Labels & Ratings
  • OK Compost
  • EN 13432(EU)-Biodegradable
  • ASTM D6400(North America)-Biodegradable,
  • AS 4736(Australia)-Biodegradable

Product performance

Fully biodegradable (PLA based). Has excellent mechanical properties, in between PE and PP as well as has controlled storage and shelf life. It is weldable, printable and color tailor-made product.... 

  • Material Status
  • Commercial
PROPERTIES
Impact Properties
Value
Test Conditions
Test Method
Notched Izod Impact
ASTM D256
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
ASTM D790
Flexural Strength
ASTM D790
Tensile Elongation
ASTM D638
Tensile Strength (Tensile Stress)
ASTM D638
Physical Properties
Value
Test Conditions
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
ASTM D1238
Molding Shrinkage
ASTM D955
Specific Gravity (Density)
ASTM D792
Thermal Properties
Value
Test Conditions
Test Method
Heat Deflection Temperature Under Load (HDT)
ASTM D648
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Extrusion >> Blow molding
Extrusion >> Films (blown)
Extrusion >> Films (cast)
Extrusion - Back Pressure
5 - 15 MPa
Extrusion - Barrel Center Zone Temperature
155 - 180 °C
Extrusion - Barrel Front Zone Temperature
165 - 190 °C
Extrusion - Barrel Rear Zone Temperature
140 - 160 °C
Extrusion - Drying Temperature
80 °C
Extrusion - Melt Temperature
145 - 175 °C
Extrusion - Processing Melt Temperature
210 °C
Injection - Drying Time
4 hr
Injection - Mold Temperature
30 - 50 °C
Injection speed is slow to moderate.
Back to Top