DuPont™ Sorona® EP 3030G BK001

Supplier: DuPont
GENERAL INFORMATION
Product type:
Thermoplastic >> Polyester >> Polytrimethylene Terephthalate [PTT]

Product performance

DuPont™ Sorona® EP 3030G BK001 is a high performance polytrimethylene terephthalate thermoplastic polymer grade reinforced with 30% glass. It is made with a key intermediate called Susterra™ renewably... 

  • Material Status
  • Commercial
PROPERTIES
Electrical Properties
Value
Test Conditions
Test Method
Comparative Tracking Index
IEC 60112
Dielectric Strength (Electric Strength)
IEC 60243-1
Dielectric Strength (Electric Strength)
IEC 60243-1
Dissipation Factor
IEC 60250
Dissipation Factor
IEC 60250
Relative Permittivity
IEC 60250
Relative Permittivity
IEC 60250
Surface Resistivity
IEC 60093
Volume Resistivity
IEC 60093
Flammability Properties
Value
Test Conditions
Test Method
Burning Behavior
IEC 60695-11-10
Burning Behavior
IEC 60695-11-10
Flammability
IEC 60695-11-10
Glow Wire Flammability Index
IEC 60695-2-1/2
Glow Wire Flammability Index
IEC 60695-2-1/2
Glow Wire Flammability Index
IEC 60695-2-1/2
Glow Wire Ignition Temperature
IEC 60695-2-1/3
Glow Wire Ignition Temperature
IEC 60695-2-1/3
Glow Wire Ignition Temperature
IEC 60695-2-1/3
Oxygen Index
ISO 4589-1/-2
Impact Properties
Value
Test Conditions
Test Method
Charpy Impact Strength
ISO 179/ 1eU
Charpy Notched Impact Strength
ISO 179/ 1eA
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus
ISO 178
Flexural Strength
ISO 178
Tensile Modulus
ISO 527-2
Tensile Strain
ISO 527-2
Tensile Strength (Tensile Stress)
ISO 527-2
Physical Properties
Value
Test Conditions
Test Method
Thermal Properties
Value
Test Conditions
Test Method
Heat Deflection Temperature Under Load (HDT)
ISO 75-1/-2
Heat Deflection Temperature Under Load (HDT)
ISO 75-1/-2
Melting Temperature (Melting Point)
ISO 11357-1/-3
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
120 °C
Injection - Drying Time
2 - 4 hr
Injection - Ejection Temperature
175 °C
Injection - Mold Temperature
80 - 110 °C
Injection - Processing (Melt) Temp
250 - 270 °C
Injection - Suggested Max Moisture
0.02 %
1. Drying is recommended.
2. Optimum melt temperature is 260°C.
3. Optimum mold temperature is 100°C.
4. Back pressure should be as low as possible.
Back to Top