deTerra® XP698-High Impact White Injection Molding Grade

Supplier: IFS Engineered Plastic Compounds
GENERAL INFORMATION
Product type:
Thermoplastic >> PLA (Polylactide) >> Polylactide (Polylactic Acid) [PLA]

Product performance

deTerra® XP698-High Impact White Injection Molding Grade is a bio-based polymer made from biodegradable PLA. Shows improved mechanical properties, ductility, optical clarity and high impact strength.... 

  • Appearance
  • White Color
  • Material Status
  • Commercial
PROPERTIES
Films Properties
Value
Test Conditions
Test Method
(Tensile) Elongation
ASTM D638
Tensile Strength (Tensile Stress)
ASTM D638
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ASTM D256
Charpy Unnotched Impact Strength
ASTM D256
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus
ASTM D790
Flexural Strength
ASTM D790
Tensile Modulus
ASTM D638
Physical Properties
Value
Test Conditions
Test Method
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
ASTM D1238
Specific Gravity (Density)
ASTM D792
Thermal Properties
Value
Test Conditions
Test Method
Melting Temperature (Melting Point)
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
120 °F
Injection - Drying Time
2 - 4 hr
Injection - Processing (Melt) Temp
330 - 370 °F
Injection - Suggested Max Moisture
0.10 %
This information is intended to be used only as a guideline for designers and processors of modified thermoplastics. Because design and processing is complex, a set solution will not solve all problems. Observation on a ‘trial and error’ basis may be required to achieve desired results.
Back to Top