Cellidor® B 500-13

Supplier: Albis
GENERAL INFORMATION
Product type:
Thermoplastic >> Cellulosic Polymers >> Cellulose Acetate Butyrate [CAB]

Product performance

Cellulose acetate butyrate. Has 13 % phthalate-free plasticizer and low odor. It is an organic, thermoplastic cellulose ester which consists of approximately 45% cellulose, a renewable natural... 

  • Material Status
  • Commercial
PROPERTIES
Flammability Properties
Value
Test Conditions
Test Method
Flame rating (UL 94)
Flame rating (UL 94)
Hardness Properties
Value
Test Conditions
Test Method
Ball Indentation Hardness
ISO 2039-1
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Unnotched Impact Strength
ISO 179/1eU
Charpy Unnotched Impact Strength
ISO 179/1eU
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus
ISO 75
Flexural Strength
ISO 178
Flexural Stress
ISO 178
Tensile Modulus
ISO 527
Tensile Strain
ISO 527
Tensile Strain
ISO 527
Tensile Strength (Tensile Stress)
ISO 527
Tensile Strength (Tensile Stress)
ISO 527
Physical Properties
Value
Test Conditions
Test Method
Melt Volume-Flow Rate (MVR)
ISO 1133
Specific Gravity (Density)
ISO 1183
Thermal Properties
Value
Test Conditions
Test Method
Heat Deflection Temperature Under Load (HDT)
ISO 75/A
Vicat Softening Temperature
ISO 306
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Drying Temperature
60 - 90 °C
Injection - Drying Time
2 - 4 hr
Injection - Mold Temperature
40 - 80 °C
Injection - Processing (Melt) Temp
180 - 230 °C
Injection - Suggested Max Moisture
< 0.15 %
Back to Top