Cellidor® B 500-10

Supplier: Albis
GENERAL INFORMATION
Product type:
Thermoplastic >> Cellulosic Polymers >> CAB

Product performance

Cellulose acetate butyrate. Has 10 % plasticizer content/extractable contents. It is an organic, thermoplastic cellulose ester which consists of approximately 45% cellulose, a renewable natural... 

  • Material Status
  • Commercial
PROPERTIES
Electrical Properties
Value
Test Conditions
Test Method
Surface Resistivity
IEC 60093
Volume Resistivity
IEC 60093
Hardness Properties
Value
Test Conditions
Test Method
Ball Indentation Hardness
ISO 2039-1
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Unnotched Impact Strength
ISO 179/1eU
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Strength
ISO 178
Nominal Tensile Strain at Break
ISO 527
Tensile Modulus
ISO 527
Tensile Strain
ISO 527
Tensile Strength (Tensile Stress)
ISO 527
Tensile Strength (Tensile Stress)
ISO 527
Physical Properties
Value
Test Conditions
Test Method
Melt Volume-Flow Rate (MVR)
ISO 1133
Specific Gravity (Density)
ISO 1183
Thermal Properties
Value
Test Conditions
Test Method
Heat Deflection Temperature Under Load (HDT)
ISO 75/A
Vicat Softening Temperature
EN ISO 306
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Mold Temperature
40 - 80 °C
Injection - Processing (Melt) Temp
190 - 235 °C
Back to Top