AKROMID® S3 GF 30 4

Supplier: AkroPlastic
GENERAL INFORMATION
Product type:
Thermoplastic >> PA (Polyamide, Nylon) >> Polyamide 6-10 (Nylon 6-10) [PA 6-10 (Nylon 6-10)]

Product performance

Renewable resource-based polyamide 6.10. Has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. It is synthesized from castor oil which is... 

Access upon free registration

  • Material Status
    • Commercial
  • Launch Date
    • 01/2010
PROPERTIES
Hardness Properties
Value
Test Conditions
Test Method
Ball Indentation Hardness
Access upon free registration
ISO 2039-1
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
Access upon free registration
ISO 179/1eA
Charpy Notched Impact Strength
Access upon free registration
ISO 179/1eA
Charpy Unnotched Impact Strength
Access upon free registration
ISO 179/1eU
Charpy Unnotched Impact Strength
Access upon free registration
ISO 179/1eU
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
Access upon free registration
ISO 178
Flexural Strain
Access upon free registration
ISO 178
Flexural Strength
Access upon free registration
ISO 178
Tensile Elongation
Access upon free registration
ISO 527-1/2
Tensile Modulus
Access upon free registration
ISO 527-1/2
Tensile Strength (Tensile Stress)
Access upon free registration
ISO 527-1/2
Physical Properties
Value
Test Conditions
Test Method
Moisture absorption
Access upon free registration
ISO 1110
Reinforcement Content
Access upon free registration
ISO 1172
Specific Gravity (Density)
Access upon free registration
ISO 1183
Thermal Properties
Value
Test Conditions
Test Method
Heat Distortion Temperature (HDT/A)
Access upon free registration
ISO 75-1/2
Heat Distortion Temperature (HDT/C)
Access upon free registration
ISO 75-1/2
Melting Temperature (Melting Point)
Access upon free registration
ISO 11357-1
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Back Pressure
4 - 10 psi
Injection - Drying Temperature
80 °C
Injection - Drying Time
2 - 8 hr
Injection - Feed Section
60 - 80 °C
Injection - Flowability
400 mm
Injection - Holding Pressure
200 - 800 psi
Injection - Injection Pressure
750 psi
Injection - Mold Surface
70 - 120 °C
Injection - Mold Temperature
80 °C
Injection - Nozzle Temperature
240 - 295 °C
Injection - Processing (Melt) Temp
260 - 320 °C
Injection - Sector 1-Sector 4
225 - 300 °C

Products with same tradename

AKROMID® A 28 GF 30 1 GIT

AKROMID® A3

AKROMID® A3 1 L

AKROMID® A3 1 S3

Back to Top