Akromid® S3 GF 15 1

Supplier: AkroPlastic
GENERAL INFORMATION
Product type:
Thermoplastic >> PA (Polyamide, Nylon) >> Polyamide 6-10 (Nylon 6-10) [PA 6-10 (Nylon 6-10)]

Product performance

Renewable resource-based polyamide 6.10. Has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. It is synthesized from castor oil which is... 

  • Material Status
  • Commercial
  • Launch Date
  • 01/2010
PROPERTIES
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Unnotched Impact Strength
ISO 179/1eU
Charpy Unnotched Impact Strength
ISO 179/1eU
Mechanical Properties
Value
Test Conditions
Test Method
Tensile Elongation
ISO 527-1/2
Tensile Modulus
ISO 527-1/2
Tensile Strength (Tensile Stress)
ISO 527-1/2
Physical Properties
Value
Test Conditions
Test Method
Moisture absorption
ISO 1110
Reinforcement Content
ISO 1172
Specific Gravity (Density)
ISO 1183
Thermal Properties
Value
Test Conditions
Test Method
Heat Distortion Temperature (HDT/A)
ISO 75-1/2
Heat Distortion Temperature (HDT/C)
ISO 75-1/2
Heat DistortionTemperature (HDT/B)
ISO 75-1/2
Melting Temperature (Melting Point)
ISO 11357-1
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Back Pressure
4 - 10 psi
Injection - Drying Temperature
80 °C
Injection - Drying Time
2 - 8 hr
Injection - Feed Section
60 - 80 °C
Injection - Flowability
450 mm
Injection - Holding Pressure
200 - 800 psi
Injection - Injection Pressure
750 psi
Injection - Mold Surface
70 - 120 °C
Injection - Mold Temperature
80 °C
Injection - Nozzle Temperature
240 - 295 °C
Injection - Processing (Melt) Temp
260 - 320 °C
Injection - Processing Shrinkage
0.6 %
1.1 %
Injection - Sector 1-Sector 4
225 - 300 °C
Back to Top