Akromid® S3 1

Supplier: AkroPlastic
GENERAL INFORMATION
Product type:
Thermoplastic >> PA (Polyamide, Nylon) >> Polyamide 6-10 (Nylon 6-10) [PA 6-10 (Nylon 6-10)]

Product performance

Renewable resource-based polyamide 6.10. Has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. It is synthesized from castor oil which is... 

  • Material Status
  • Commercial
  • Launch Date
  • 01/2010
PROPERTIES
Electrical Properties
Value
Test Conditions
Test Method
Comparative Tracking Index
IEC 60112
Hardness Properties
Value
Test Conditions
Test Method
Ball Indentation Hardness
ISO 2039-1
Impact Properties
Value
Test Conditions
Test Method
Charpy Notched Impact Strength
ISO 179/1eA
Charpy Notched Impact Strength
ISO 179/1eA
Mechanical Properties
Value
Test Conditions
Test Method
Flexural Modulus (Stiffness)
ISO 178
Tensile Elongation
ISO 527-1/2
Tensile Modulus
ISO 527-1/2
Tensile Strength (Tensile Stress)
ISO 527-1/2
Physical Properties
Value
Test Conditions
Test Method
Moisture absorption
ISO 1110
Specific Gravity (Density)
ISO 1183
Thermal Properties
Value
Test Conditions
Test Method
Heat Distortion Temperature (HDT/A)
ISO 75-1/2
Heat DistortionTemperature (HDT/B)
ISO 75-1/2
Melting Temperature (Melting Point)
ISO 11357-1
CONVERSION MODE & PROCESSING GUIDELINES
Conversion Mode
Injection molding - thermoplastics
Injection - Back Pressure
4 - 10 psi
Injection - Drying Temperature
80 °C
Injection - Drying Time
2 - 8 hr
Injection - Feed Section
60 - 80 °C
Injection - Flowability
700 mm
Injection - Holding Pressure
200 - 800 psi
Injection - Injection Pressure
750 psi
Injection - Mold Surface
70 - 120 °C
Injection - Mold Temperature
80 °C
Injection - Nozzle Temperature
240 - 295 °C
Injection - Processing (Melt) Temp
260 - 320 °C
Injection - Processing Shrinkage
1.6 %
1.8 %
Injection - Sector 1-Sector 4
225 - 300 °C
Back to Top